Lumen help
Use Lumen® Edge Private Cloud on VMware Cloud FoundationTM to configure a site-to-site VPN (virtual private network) for IPsec VPN sites. Use this VPN to connect Lumen Edge Private Cloud on VMware Cloud FoundationTM to your Lumen Cloud. After you configure this, you must configure your Lumen Cloud to finish the connection.
To configure a site-to-site VPN for IPsec VPN sites:
Field | Description |
Name | Type a name for the IPSec VPN tunnel. |
Description | Type a description for the IPSec VPN tunnel. |
Security Profile | Select the security profile for the IPSec VPN tunnel. To expand the profile details, click located next to the profile. |
Status | Turn this option on to enable the IPSec VPN tunnel. |
Logging | Turn this option on to enable logging of activity on the IPSec VPN tunnel. |
Field | Description |
Authentication Mode | Select one of the following options:
|
Pre-Shared Key | If you are authenticating using a pre-shared key, type the pre-shared key for the IPSec VPN tunnel. |
Server Certificate | If you are authenticating using a certification, click Select, then select the sever certificate in the Use VMware Cloud Director Certificate section. |
CA Certificate | If you are authenticating using a certification, click Select, then select the CA (certificate authority) certificate in the Use VMware Cloud Director Certificate section. |
Field | Description |
IP Address | Type the IP address of the local endpoint for the IPSec VPN tunnel. |
Networks | Type the network CIDRs, separated by commas, for the local endpoint that the IPSec VPN tunnel will use. |
Logging | Select this option to enable logging of activity on the IPSec VPN tunnel. |
IP Address | Type the IP address of the remote endpoint for the IPSec VPN tunnel. |
Networks | Type the network CIDRs, separate by commas, for the remote endpoint that the IPSec VPN tunnel will use. |
Remote ID | Type the unique identifier for the remote endpoint. Тhis remote ID depends on the authentication mode selected for the tunnel. If you do not set it, the remote ID defaults to the remote IP address. |
Explore Edge Computing Solutions