Lumen help
Thank you for choosing Lumen as your network provider. By moving to our network, you'll benefit from
Your migration coordinator submits your order and manages it until you activate your new service. Your migration coordinator also manages disconnecting your old services and provides you with a timelime for completing your order. If you ever have questions, contact your migration coordinator, who will answer your questions and help resolve any issues. Here are the primary times your migration coordinator will contact you
As we migrate you to our network, use this guide to follow the process step by step and to know where we'll need your help.
Your dedicated migration coordinator contacts you to check the details of your order so we can migrate you as quickly as possible. We'll need to confirm
Once we verify the information, your migration coordinator submits your order.
During the site survey, we'll check to make sure your equipment room is ready for your new service. While we're submitting your order, it's a good time to be sure your room meets our requirements.
The order-entry and order-validation teams check your order and then send it to the provisioning team to design your on-net service. We may also contact you (or your local contact) if we have additional questions.
The installation team reviews the design and then requests a site survey (using either Lumen technicians or a third-party vendor). We'll work with the local contact you specified to schedule and complete the survey. If you're in a leased building, be sure to coordinate access with building management so we can complete the survey. Based on the results of the survey, we may need to send technicians back to install additional equipment or to extend wiring so we're able to complete your order.
To make this migration easier for you, Lumen will complete any inside wiring needed to connect the services from the demarcation point to your equipment within the same building at no additional charge (subject to availability)—known as building extension service. Work performed is subject to the building extension service schedule (available upon request).
In some rare cases, we may not be able to provide the building extension at no additional charge. If necessary, we'll contact you to discuss your options and any charges before starting the work.
Once we've installed your service, we'll test the service to make sure it's working correctly (and according to your specifications). When everything is working correctly, the order moves to Pending Activation status.
Note: Testing your new service won't affect your existing service. We won't make any changes to your existing service until they switch you over to your new services (referred to as a hot cut).
After your new service is ready, we'll contact you to schedule when we will activate the new service (which must be completed within 30 calendar days). Typically, we move you to the new service using a hot cut. A hot cut requires a brief downtime (typically just a few minutes) and we'll work with you to schedule this to minimize impacts to your business, including scheduling after hours or over a weekend. To activate some services, we'll need to have a Lumen technician at your location and we'll coordinate with your local contact to arrange a date and time.
We'll provide you with a customer commit date—the date and time we'll activate your service. If you can't meet the date, contact your migration coordinator as soon as possible to reschedule. If we do not hear from you or you're not ready on that day/time, we may start billing you for your new service.
After we activate your new service and turn it over to you, we'll submit the disconnect request for your old (off-net) circuit. You do not need to do anything for the disconnect to take place; Lumen takes care of it for you. If your old circuit is disconnected before your contract end date, we will waive any early termination penalties resulting from your migration.