Menu

Lumen help

Creating a connection from your location to Google

Using Control Center, you can create a Lumen® Dynamic Connections Ethernet connection from your location (from your list of available UNIs) to Google. To create the connection, you'll need a pairing key from Google. Be sure to have that information handy to type in (or copy/paste).

Note: You can only use a pairing key that hasn't been used before. Once you use a pairing key, you'll have to request a new one from Google.

To create a connection from your location to Google:

  1. Click Services.

    Control Center shows the Services console. Use the console to access an inventory of your services, check the status of orders, and manage your services.
Services console
  1. In the Service and Ordering Tools box, click Dynamic Connections - Ethernet.

    Control Center lists all your connections with a status and brief summary for each connection.
Dynamic Connections (showing Ethernet tab)
  1. Click Create Connection.
Ethernet Create Connection
  1. In the Connection Name field, type a name for the connection you're creating. (Be sure to use something memorable. This name will appear on your invoice.)
  1. In the From Connection Type field, select My Locations.
  1. In the To Connection Type field, select Google.
Ethernet Create Connection (showing a connection from your location to Google)
  1. Fill in the information for the connection:

    1. In the From Location field, select the connection origination endpoint. (To view a list of available locations and status for each, click MY PORTS.)

    2. In the Ce-Vlan field, type an unused VLAN ID (between 1 and 4094). (If you type in a VLAN ID and it's already in use, Control Center highlights it in red.)

    3. In the Google Pairing Key field, type or copy and paste your pairing key provided by Google. You can only use a pairing key once. Once you use a pairing key, you'll have to request a new one from Google.

      Once you fill in the pairing key, Control Center retrieves connection information from Google and adds a field so you can select the Google termination location.

    4. In the To Location field, select the Google location where you want to terminate the connection.
  1. Use the Billing Method buttons to select whether you want monthly or hourly billing for the connection.
  1. In the Class of Service field, select whether you want Basic, Enhanced, or Dedicated. (Higher classes of service offer higher availability SLAs and allow you to increase traffic prioritization for your EVC.)

    • Basic (best effort): The service may be oversubscribed on the Lumen network.

    • Enhanced (mid class): Enhanced EVCs (ethernet virtual circuits) can still be oversubscribed like Basic class of service EVCs; however, traffic is marked with an internal class of service marking which will prioritize your traffic over best-effort traffic during times of congestion. For EVCs with this class of service, bandwidth is not reserved on the Lumen network and traffic will not take priority over real-time traffic in the network.

    • Dedicated (real time): The quality of service offering with highest priority on the Lumen network. In addition, Lumen reserves the bandwidth for this EVC across the network on each ring that the EVC touches. Once it is dedicated to you, that bandwidth (and the corresponding CE-VLANs) sits in reserve regardless of how much bandwidth you use.
  1. In the Bandwidth field, select the bandwidth for the connection. (You can't change the bandwidth once you create the connection. If you need to choose a different bandwidth after creating a connection, disconnect the connection and create a new one.)

    Control Center shows pricing for the bandwidth you selected.
  1. Review your connection information and then click the I agree with the terms and conditions checkbox. (To enable the checkbox, scroll to the bottom of the terms and conditions.)

  1. Click Submit.

    Control Center creates the request for the connection and places it in Pending Activation status. From here, you can view the status of the connection.
  1. If you selected Create a redundant pair of VLAN attachments when you created the VLAN attachment with Google, repeat steps 3–10 to create another connection with the second pairing key.